Customers say
Customers find the monitor mount sturdy with a secure clamp and appreciate its functionality, with one noting the arm and gas spring work great. The mount is easy to install with clear instructions, and customers like its motion range, with smooth movement in any direction. They praise its adjustment ability, with one mentioning the gas cylinder makes adjustments very easy, and its versatility in mounting options. Customers appreciate how it clears up desk space, doubling the usable desktop area, and consider it good value for money.
Make It Yours – See Your Price On Amazon!
Your Sales Price $49.99 - $35.99
A quick rundown of this product’s key features:
Great Adaptability: This HUANUO single monitor arm fits 13-32 inch monitors, holds 4.4-19.8 lbs, suitable for VESA patterns of 75x75mm & 100x100mm. This monitor mount is specially designed for ergonomics, aiming to help people work comfortably, and to help people have a better viewing experience.
Full Adjustable: This PC monitor stand can remain completely stable at any angle without any extra work. Compared with other single monitor arm adjustment methods, huanuo can make you adjust screws repeatedly, this monitor arm is easy to use and has a tilt range from -50°to +85°, ±90 ° swivel, and 360°rotation, so your screen can be lifted up to 39.6cm from desktop with one hand.
80% Sturdier Than Others: At HUANUO, we focus on improving the strength and stability of our single monitor stand. The single desk monitor mount uses automotive-grade gas spring cores and has undergone 20,000 motion tests, which means it can be used continuously for more than 5 years without issue.
Installed In 3 Minutes: The 1-piece design monitor arm simplifies the installation, so all necessary hardware is included; The setup can be completed in 3 minutes. Step 1: Affix the bracket to your table; Step 2: Attach your monitor to the VESA plate; Step 3: Adjust tension according to your monitor weight.
Two mounting options : You may choose to use either a C-clamp or grommet mount. For best results, make sure your table meets the following criteria: wood tabletop is recommended; the underside of the tabletop should ideally be free of any beams or panels that may interfere with the installation; the tabletop thickness and grommet mounting can support 0.59″-3.54”.
Our Top Reviews
Reviewer: sg
Rating: 5.0 out of 5 stars
Title: Fits 34” Ultrawide
Review: I’ve had this mount for 3 years and it has been great. I used it for a 27” monitor for years and recently upgraded. Well, I go to look at this listing and it says just 32”. Well I can prove it can handle a 34” Ultrawide. I use the dual mount by the same company at work and they have been absolutely fantastic for client meetings. I bought this 2 years after using them at work, and it has made my work AND gaming experience infinitely better. You can position the mount anywhere. I had to move it with the 34” compared to the 27”, but it still holds.The biggest con is how tightly wound the gas mount is. They’ve improved it with a recent iteration I’ve installed at work, but you will be spinning the allen wrench a good 20 full rotations before it eases its movement. But the quality of the gas mount has held up for years.My monitor is 15 lbs and it hoists it with ease.
Reviewer: Connor Holzinger
Rating: 5.0 out of 5 stars
Title: Surprisingly Strong and Stout
Review: Bought this mount to use at work; I’m an automotive technician and have limited space available and didn’t want to drill a hole if I could help it. I just needed to mount my display far away enough behind and up behind my toolbox to allow me to see it while not impeding usage of the magnetic cover that comes with my toolbox. This also frees up the space on top of my toolbox that would have otherwise been use up by the display stand. I didn’t have to adjusts the gas spring tension but I could have added more if needed. For the cost, this mount, (along with a scrap wood block for spacing/mounting purposes) works perfectly and is surprisingly strong and sturdy. Just take care and pay attention to the directions when assembling and installing.
Reviewer: Jeff Thompson
Rating: 5.0 out of 5 stars
Title: Best mounting solution I have seen.
Review: I ordered this to use with my new drawing tablet display. I had seen some for a bit less, but they did not look as robust as this one. Given this is for my work it needs to be beefy enough to hold up to constant use and the added weight of my arm on the tablet.Setup was very simple, the part that took the most work was setting the tension and getting it tuned in for my use case. You get more than enough hardware to fit your needs, I would like to say that the manual was useful but I did not even need to read it as everything is so straight forward. Just from looking at the photos on here at the time I was shopping was enough to put it together. I will say it is a well put together manual but I only cracked it open as writing this review.I want to list cons, but the only one I can think of is that I wish it came with thumb screws for the visa mount. In fact it is so nice that I will be replacing my current dual monitor mount out for 2 more of these. I don’t normally give five star ratings, but this earned all 5 stars.
Reviewer: Zach
Rating: 4.0 out of 5 stars
Title: Great stand, forward/back tilt could use some improvement
Review: The mount does what it says it will, it has good cable management, good support/doesn’t fall down even at full articulation, the arm has good articulation and is easy to move yet stable. Installation is simple.The reason for 4/5 is that the tilt function is… challenged. Side to side (left/right axis) tilt is great, it’s the tilting up and down that’s a problem. There seem to be two settings of friction to the up and down tilt- too loose or too tight. I can’t run it on the loose side or my monitor will fall forward/backward. When I make it just tight enough not to fall forward, the only way to tilt it is to grab the monitor with both hands and jerk it in/out at the top/bottom to break static friction. And this is as loose as it can be without moving on its own. It feels like I’m going to break the monitor or the joint on the arm when trying to get articulation in this axis so I just set it and adjust my chair instead. The monitor is easily rotated clockwise/ccw as well, it’s literally just the forward/back axis that is poorly designed and is weirdly notchy- like it’s trying to lock into place after being set but then won’t let go for adjustment.Anyways for $35 or whatever it’s on sale for I would absolutely buy it again. Just make sure your chair is adjustable to make up for the fact you won’t want to be changing the monitor height itself much.
Reviewer: Its1Tap
Rating: 5.0 out of 5 stars
Title: Trusty room saver!
Review: Works amazingly thinking about getting 2 more or a double of the same brand I’ve had it for about a month, and have had no problems at all, the only thing I can say is the movement feels a little tight on the tilt which I don’t really use.
Reviewer: Alexander
Rating: 5.0 out of 5 stars
Title: good product
Review: works great, only problem i have is when you try to turn it vertical it actually dosent lock into place. i dont need a vert monitor, but when i move my monitor slightly it tilts left or right just enough where i can notice it, not a big deal but would like to see it lock into place when using horizonal.
Reviewer: ReviewsByMatthew
Rating: 5.0 out of 5 stars
Title: Smooth, space‑saving, and solid for mid‑sized monitors
Review: I waited a while to leave this review, as I wanted to be sure it fit the bill, and didn’t break down on me. After months of use daily, here is what I’ve found:Setup took under 15 minutes, hardware for both clamp and grommet mounts is included, and the clear instructions make tension‑adjustment straightforward. The gas‑spring arm glides effortlessly, letting me tilt, swivel, or switch to portrait without sagging (my 27‑inch, 16‑lb monitor sits rock‑steady). Integrated cable channels keep the desktop tidy, and lifting the screen frees up plenty of workspace. Just note: desks thicker than about 3½ inches will need the grommet option, and a 32‑inch display at the top end of the weight range may require an extra tweak to the tension screw. Overall, an excellent budget‑friendly arm that feels far pricier than it is.
Reviewer: Wil
Rating: 5.0 out of 5 stars
Title:
Review: Amazed by the flexibility of this thing. Really can turn at any weird angles which helps my work. I’m able to turn the monitor to face the visitors as well back to an angle where people standing could see. Love the hydraulic sound that comes with it that sounds like robocop. Only downside is I still haven’t figure out how to loosen the adapter holding the monitor. The instruction is to use the Allen key but it doesn’t fit. Need to check online on this
Reviewer: ALex
Rating: 5.0 out of 5 stars
Title:
Review: Facile à monter et de bonne qualité
Reviewer: jamid
Rating: 5.0 out of 5 stars
Title:
Review: Awesome
Reviewer: Cliente de Amazon
Rating: 5.0 out of 5 stars
Title:
Review: Le monté un monitor de 32 pulgadas y lo ha sostenido sin problemas, es fácil de instalar y ajustar, se siente bastante sólida con el monitor.
Reviewer: Teesa
Rating: 5.0 out of 5 stars
Title:
Review: Got this on sale for under $60 and it works great for my HP All-in-One monitor set up. As the HP is just a larger monitor, there was no VESA mount, so I bought an adapter first. But this gives me the best angle, as it’s also got tilt/swivel ability. (I also got a steel mounting plate that is clamped onto my desk, as the desk rail itself wasn’t wide enough for the monitor.)
Price effective as of Jun 29, 2025 15:09:54 UTC
As an Amazon Associate Dealors may receive a commission for purchases made through these links.
