Grab Yours Today – Buy Now On Amazon!
Your Sales Price $35.00 - $16.99
Directly Replaceable Original: This upgrade DIY light bar kit is for Flashforg Adventuer 5M/5M Pro 3d print project, directly replace for the led when the original one is broken. Note: Regular 5M doesn’t have the port for lighting control, you need to use a separate switch outside the touch-screen to control the power supply or completely power the printer down
Voltage: 24V, Current: 0.2A, Power: about 4.8W, Low power and high brightness. Led board with two 8.5mm mounting holes for the mounting screws to fix the light bar to the front panel of the AD5M pro 3d prints or the light board on the dual side panels of the 5M by means of the magnts supplied
23cm/9.06in length light board contains 7pcs illuminated led chips, stabilised constant current light can create a comfortable and even healthy spatial light sense for AD5M. Connection cable length 71.5cm/28.15in for connecting led and PCB control board, supply power, plug and play
Good modification allows better viewing of the hotend extruder print head, 0.4mm brass nozzle or 3d printings part, operation of the printer, replacement of 1.75mm filament, etc
Install the required print parts STL files, please refer to the picture or Thingives search: 5M pro light board bracket. Lights board have terminals on both ends of the board, if you need a brighter ad5m environment, you just need to prepare two light boards and connecting wires for series connection, we are equipped with two small magnetts for installation
Price effective as of May 31, 2025 00:20:52 UTC
As an Amazon Associate Dealors may receive a
commission for purchases made through these links.
