Customers say
Customers find the portable electronic device mount functional and well-fitting for various camera bodies. They appreciate its sturdy construction, reliable performance, and reasonable price. The mount provides good security, though some have issues with slippage. Opinions vary on access to the battery compartment and tiltability.
Make It Yours – See Your Price On Amazon!
Your Sales Price $33.99 - $19.95
A quick rundown of this product’s key features:
Arca-Swiss compatible L plate.
39mm wide.
4 safety stop screws.
1/4″-20 screw with 4mm hex & flat head slot.
Includes 2 allen wrenches
Our Top Reviews
Reviewer: R. Mallory
Rating: 5.0 out of 5 stars
Title: This is a fine L-Plate for cameras that it fits.
Review: In short, this is a fine product for cameras that it fits well. I have tested this item on four different cameras and several different tripods. First I will note that it appears well made and had a descent finish about it. I tried it on a Nikon D600 and it is a bit small on the bottom where it screws in to the camera body, but it will work, though a bit tight where Nikon places the mounting on the D600. As a result, access to the left side of the camera is restricted and a wired cable release cannot be used. It fits fine on a D5000 – though it blocks the fold down mirror – tried it on a friend’s D3200 for giggles, and a Nikon 1 V1(where I now use it regularly), So it is probably the right size for mirrorless and the smaller consumer DSLR cameras. I have three different Arca-Style tripod heads – all different brands – and the one I received fits fine on all three. Just doesn’t fit a number of larger size camera bodies that need to access the left side for access to various ports. Still quite a bargain for a very functional and useful L-Plate. However, if you are going to buy a $2000+ DSLR like a D600 or a 5D amongst many others, buying a good L-Bracket that is made for the camera by companies like Kirk, RRS or SUNWAYFOTO is a good and rather inexpensive investment.
Reviewer: DASA
Rating: 4.0 out of 5 stars
Title: Great value for a low-profile L-Plate
Review: This is a nice low profile Arca-Swiss dovetail L-bracket with a slotted base-plate which allows you to fit it to many different camera bodies by adjusting the slot the attachment screw fits into. I own several expensive L-plates from Really Right Stuff and Kirk and was getting tired of how large these brackets were becoming in order for the remote cables and HDMI ports to be usable while using the bracket. If you HAVE to have access to the ports on the left side of the camera while shooting then this L-plate is not for you. If you don’t mind using the self-timer to release the shutter or, in my case, are using a Nikon where the release port is located in the front (Thank You Nikon) such as the D700, D3, D4, or D800 etc then this is a wonderful plate. I love how low-profile it is, you can leave the plate on the camera (I use it on a Nikon D700) all the time and it doesn’t get in the way. It also doesn’t block the battery compartment, but I think it would be a bit small if using it on a larger camera such as a D4 or a body with a battery grip. I used it with a Markins head as well as a Kirk BH-1 Ballhead and it worked perfectly. There are two sharp edges that need to be filed down where the plate makes a 90 degree turn, but other than that it’s good to go. The finish is top shelf as well. I will probably order another one before they disappear, they are that nice. It’s not a surprise there are no negative reviews of this product.
Reviewer: S. Abdou
Rating: 5.0 out of 5 stars
Title: A nice fit for the Sony A7R and A7
Review: I recently purchased the Sony A7R (through Amazon) and I was looking for an acra-swiss compatible L-Bracket. These cameras are so new that options are somewhat limited at present (as of Dec. 2013). I bought the Desmond L Plate DAL-1 on a whim, since the item is so reasonably priced (by L-Bracket standards). I was pleasantly surprised when I put the bracket on the camera, it’s a nearly perfect fit. The bottom doesn’t obstruct access to the battery compartment at all (that was my main concern), and the top of the `L’ vertical portion lines up with the shoulder of the camera. The fit and finish is excellent, and it looks right at home on the A7R or A7.BONUS: the bolt that inserts into the bottom of the camera mount is adjustable (it came be moved along the horizontal axis), so it is possible to make room to access the mic/headphone/HDMI/USB ports along the left side of the A7R.I have the Really Right Stuff L-Bracket on order, but it won’t be available until mid-to-late January, at the earliest. And that item costs a wallet busting $175 (!). Of course, the RRS bracket is custom fit for the A7R and A7, and the quality is exceptional. But the Desmond L Plate DAL-1 is a good solution while waiting for the RRS bracket. It’s actually a good solution for someone wanting a good bracket for these cameras, but not wanting to break the bank. Highly recommend.
Reviewer: Don R
Rating: 5.0 out of 5 stars
Title:
Review: Great fit on all my Pentax Cameras without covering the Battery door
Price effective as of Mar 05, 2025 18:11:25 UTC
As an Amazon Associate Dealors may receive a commission for purchases made through these links.
