Grab Yours Today – Buy Now On Amazon!
Your Sales Price $129.99 - $99.99
Product Description
ORICO M.2 NVMe SSD Duplicator Cloner Dual Bay Docking Station
Offline Cloning Operating Instructions
Step 1
Insert the two M2.NVMe SSDs into target and source slots.
Note: Target SSD Capacity>Source SSD Capacity.
Step 2
Connect the power adapter to the tool-free dual NVMe dock.
Hold the clone button for 10-15 seconds until LED indicator begins to flash.
Step 3
The indicator light will show the copy progress (25% -50% -75% -100%).
When the clone is completed, the 4 LED lights will always be on.
NOTE1
Do not use usb cable to connect to the computer during clone.
If there is a bad sector in the SSD, copying may stop. Scan the SSD once before copying to make sure there are no bad sectors.
Please back up the data on the target disk before copying to avoid loss of important data.
Make sure that the two SSD disks can be recognized on the computer when plug in our nvme enclosure. If not, it could not clone.
NOTE2
It’s normal that the aluminum case heats up, for the high-speed NVMe M.2 drives generate much heat while working. Do not touch the SSD during operation. Please refer to the changing diagram of temperature above.
For the brand new SSD drive, it may not find the drive, because the brand new SSD drive should be formatted before first time using. And also need to make the SSD drive partition.
To get the 10Gbps data transmission rate, the USB 3.2 interface on your PC should be USB 3.2 Gen 2. Some PCs only come with USB 3.2 Gen1 whose max speed is 5Gbps.
Cloning is completed, target disk will enter the offline mode, in offline mode, the disk cannot be recognized when the PC is connected with the USB cable. Therefore, you should select online mode manually: right-click (computer/my computer/this computer) to select management, then select disk management in the popup dialog box, and you will see a disk in the offline state, then right-click it to choose the online mode.
Main Features:
1. ORICO external NVMe ssd docking station adopts USB 3.2 Gen 2 standard(USB C port), which supports an amazing data transmission rate up to 10Gbps.
2. Support one-key offline clone can directly transfer the data from Disk 1 to Disk 2 without going through the computer.
3. ORICO M.2 ssd enclosure constructed with aluminum alloy which is better for absorbed heat dissipation.
4. Support Plug & Play and Hot-Swapping. Easy installation & no driver required.
5. Operating system compatibility: Windows, macOS, and Linux.
Max up to 8TB
Max Support 2*4TB SSDs
When ORICO M.2 dual NVMe duplicator connected to a computer, it can recognize two SSDs at the same time, supporting a single SSD max up to 4TB.
Wide Compatibility
Four Sizes SSDs
ORICO m.2 NVMe duplicator is specially designed for M Key M.2 NVME PCIe SSD of 2242/ 2260/ 2280/22110 Sizes.
Do not support NGFF SATA based B-Key and M&B-Key M.2 SSD, M.2 PCIe AHCI SSD, mSATA SSD or any SSD from Mac.
Tool-Free Installation
No Screw, No Drive
ORICO M.2 NVMe enclosure allows users to insert M.2 NVMe SSD directly, no mounting screws or attachments are necessary. Very convenient for those who have multiple M.2 NVMe SSDs that need to be frequently re-connected or used in the short run.
Wide Compatiblity: ORICO M.2 NVMe cloner supports M Key NVMe PCIe SSD (22110/2280/2260/2242), allowing dual SSDs read/write. Compatible with Windows, Mac, Linux, it connects to PCs, laptops, smart TVs, PS4, XBOX, and more for easy storage expansion
One-Key Offline Clone: Easily clone data without a PC. Just plug in your SSDs, press start, and monitor progress with the LED indicator. Ideal for quick backups. Note: Back up data on the target disk before cloning to avoid data loss
10Gbps High-Speed Transfer: USB 3.2 Gen2 tech provides up to 1000MB/s with C to C cable, and 500MB/s with C to A. UASP protocol enhances speed and stability, ensuring optimal performance for your NVMe SSDs
Tool-Free and Easy Use: No tools or drivers needed. Supports plug & play and hot swap. Package includes everything you need: two 0.5m cables (A to C, C to C) and a 5V/4A power adapter. Start using your ORICO docking station immediately
More Details: Device auto-sleeps after 10 minutes of inactivity to prolong your SSDs lifespan. Note: SSDs may heat up during use—handle with care. Contact us for a 24-hour response to any issues
Price effective as of Oct 15, 2024 18:59:02 UTC
As an Amazon Associate Dealors may receive a
commission for purchases made through these links.
